SAE140 GL3 Hypoid gear oil
| Product number: : 46851 |
|---|
| Bardahl Classic SAE 140 GL3 is a 100% mineral single grade gear oil & cardan oil for gearboxes and more heavily loaded crown and pinion wheels of classic cars. |
Tailored Advice
SAE140 GL3 Hypoid gear oil
Bardahl Classic Gear Oil SAE 140 is a 100% mineral single grade gear oil & gear oil. The viscosity matched to classics ensures a constant lubricating film under extreme loads.
Bardahl Classic Gear Oil SAE 140 has a minimum of additives and is therefore fully compatible with bronze, copper, brass and non-ferrous metals. It is suitable for sealing materials of that time (paper, cork, felt and fabric). The excellent adhesion contributes to minimal wear after a long standstill.
| Category | Description | |
|---|---|---|
| Specification | API - GL3 | |
| Application | Suitable for gearboxes and more heavily loaded crown and pinion wheels of classic cars that require a single grade gearbox oil. Contains a friction reducer |
Gerelateerde producten
Single Grade Classic Motor Oil SAE 40
Contents:
1 Liter
Bardahl Classic Motor Oil SAE 40 is a 100% mineral single grade motor oil, developed for the lubrication of petrol engines from 1900 to 1950.
Bardahl Classic Motor Oil SAE 40 has a minimum of additives and is therefore fully compatible with bronze, copper, brass and non-ferrous metals. The viscosity matched to classics ensures constant oil pressure, which keeps oil consumption to a minimum. It is suitable for sealing materials of that time (paper, felt and fabric). The excellent adhesion contributes to minimal wear of the engine when starting, even after a long standstill.
Category
Description
Specification
API Service - SB
Application
Suitable for vintage cars from 1900 to 1950. - Zn level - 425ppm
Brake Fluid DOT 3
Contents:
1 Liter
Bardahl DOT3 is a polyglycol intended for hydraulic braking systems disc and drum brakes. The specific composition ensures high chemical stability, is excellent resistance to deposits, good protection against oxidation, and is compatible with all materials present in the brake circuit.
Classic Motor Oil SAE 15W50
Contents:
1 Liter
Bardahl Classic Motor Oil SAE 15W50 is a semi-synthetic motor oil developed for the lubrication of petrol and diesel engines with and without turbo or compressor. Bardahl Classic Motor Oil SAE 15W50 consists of high-quality synthetic and mineral base oils to which a modern package of additives has been added. This formulation provides optimal protection against wear, oxidation, dilution and the formation of Black Sludge.
Extensive tests have made it clear that this motor oil was found to be suitable for reducing pollution in the engine as much as possible and can be used all year round. This oil saves fuel and is safe for catalytic converters.
Category
Description
Specification
API - SG | JASO - MA2
Application
This oil meets the most stringent requirements for gasoline (also with LPG installations), with or without turbocharger/compressor. The high Zn content of over 1100ppm makes it suitable for engines after 1970.
- Zn level - 1050ppm
Top Oil
Attribute
Description
Lubrication and Protection:
Lubricates and protects the upper part of the piston and keeps the fuel system clean. Ideal for fuels such as E10 petrol, LPG, natural gas and (bio) diesels.
Reduces Engine Problems:
Prevents power loss, oil consumption and wear caused by carbon and varnish deposits on piston rings, cylinder walls and valves.
Cleansing Effect:
Softens carbon and gum deposits, causing them to dissolve over time and burn with the fuel.
Compatibility:
Suitable for all engines, including those equipped with catalytic converters & particulate filters meet the strict EUR6 standard.
Availability:
Available in different packages: 500 ml, 5 liters, 25 liters, 60 liters, and 210 liters.
Instructions for use:To be added at a ratio of 1:1000 (25ml Top Oil per 25 liters of fuel). Self-mixing in the tank. First add Top Oil, then refuel.
Classic Motoroil HD 50/60
Contents:
1 Liter
This Bardahl motor oil is suitable for all oldtimer HD models up to 1985 (excl. Evolution). Thanks to Bardahl's unique blending method, this oil meets both an SAE 50 and SAE 60 specification. This makes changing oil in summer and winter unnecessary and therefore saves costs. Suitable for Harley Davidson - Norton - BSA - Indian - Triumph - Panther - Ariel Suitable for all USA and British classic motorcycles Follow the manufacturer's instructions Specifications API Service SF Application This Bardahl motor oil is suitable for all oldtimer HD models up to 1985 (excl. Evolution). Thanks to Bardahl's unique blending method, this oil meets both an SAE 50 and SAE 60 specification. This makes changing oil in summer and winter unnecessary and therefore saves costs.